The first quote I received was $34,800. The last one was $23,400. Same roof. Same 9.6kW system size. Same Austin address.<\/p>\n\n\n\n
That $11,400 difference isn’t a pricing error. It’s not one dishonest company and five honest ones. It’s how the solar industry is structured \u2014 and if you don’t understand what’s driving that spread, you’re at real risk of either overpaying by a third or signing with a low bidder who quietly cuts corners on equipment and permitting.<\/p>\n\n\n\n
I requested six quotes over eight weeks in the fall of 2021. Three companies responded fast. Two were slow. One ghosted me entirely after a rep came to my house and spent 45 minutes on my roof. This is what I found when I actually read the line items.<\/p>\n\n\n\n
Before I called a single company, I’d talked to Marcus \u2014 a project manager at a regional Houston installer with nine years in the business. He’d become my unofficial guide to how this industry actually works, and his first warning was about quotes specifically.<\/p>\n\n\n\n
“Most homeowners don’t know what they’re comparing,” he told me. “They see a per-watt price and think that’s the whole picture. It’s not even half of it.”<\/p>\n\n\n\n
So I standardized my request before I reached out to anyone. Every company I contacted received the same specs: a target system size of 9.5\u201310kW, purchase only (no leases, no PPAs), monocrystalline panels only, and a written quote with the specific panel model, inverter model, and permit fees listed as separate line items.<\/p>\n\n\n\n
That last requirement eliminated two companies immediately. They wouldn’t provide equipment-level detail in writing. One said they’d “share specs at contract signing.” That’s not how this works \u2014 you compare before you sign, not after.<\/p>\n\n\n\n
Four companies made it to the comparison.<\/p>\n\n\n\n
Quote A \u2014 large national installer:<\/strong> $34,800 \/ 9.6kW \/ LG NeON panels \/ Enphase IQ7 microinverters<\/p>\n\n\n\n Quote B \u2014 regional Texas company:<\/strong> $31,200 \/ 9.8kW \/ REC Alpha panels \/ SolarEdge string inverter<\/p>\n\n\n\n Quote C \u2014 mid-size Austin-area installer (the one I chose):<\/strong> $28,400 \/ 9.6kW \/ SunPower Maxeon panels \/ Enphase IQ8 microinverters<\/p>\n\n\n\n Quote D \u2014 local two-person operation:<\/strong> $23,400 \/ 9.8kW \/ Canadian Solar panels \/ SolarEdge string inverter<\/p>\n\n\n\n All four quotes were for roughly the same output capacity. The top-to-bottom spread was $11,400 \u2014 nearly 49% more expensive at the high end than at the low end.<\/p>\n\n\n\n The national company \u2014 one of the bigger residential solar brands in the country \u2014 had the highest quote by a significant margin. Once I dug in, the reason was clear.<\/p>\n\n\n\n Large national installers carry overhead that regional ones simply don’t. National sales teams, door-to-door reps on commission, call centers, marketing spend. According to EnergySage’s national solar pricing data<\/a>, quotes from large national installers run 10\u201320% higher than regional competitors for equivalent systems \u2014 a pattern consistent across most US markets.<\/p>\n\n\n\n There was also a specific equipment problem with Quote A. The LG NeON panels they specified had been discontinued \u2014 LG exited the solar manufacturing business in 2022, citing competitive pressure. The rep either didn’t know or didn’t mention it. A discontinued panel line means future replacement parts and warranty claims go through a third-party servicer, not the original manufacturer. That’s a risk I wasn’t willing to absorb for a 25-year system.<\/p>\n\n\n\n Quote A was out.<\/p>\n\n\n\n The two-person local operation offered Canadian Solar panels \u2014 a perfectly serviceable manufacturer used on commercial installs worldwide \u2014 but at a price that immediately raised a flag for Marcus when I described it.<\/p>\n\n\n\n “At $23,400 for a 9.8kW system in Austin, something’s missing from that quote,” he said. “Permits, interconnection fees, or crew.”<\/p>\n\n\n\n He was right on two counts. When I called and asked for a full breakdown, I found that the quote excluded Austin Energy’s interconnection application fee ($400) and the city of Austin building permit fee ($650). It also didn’t include system monitoring setup or the cost of the utility-required disconnect switch.<\/p>\n\n\n\n Adding those brought the effective quote to $24,650. Still cheaper \u2014 but the installation crew was fully subcontracted, which Marcus had flagged as a risk for warranty and post-install support. If something goes wrong two years out and the subcontractor has moved on, your warranty claim goes through a company that no longer has the crew who touched your roof.<\/p>\n\n\n\n SunPower Maxeon panels carry the highest efficiency ratings in residential solar \u2014 typically 22\u201323% versus 19\u201321% for most competitors. On my available south-facing roof section of roughly 540 sq ft, that efficiency difference translates to an estimated 400\u2013600 additional kWh per year over the system’s life. Not enormous, but real.<\/p>\n\n\n\n More important was the warranty structure. SunPower offers 25 years on product, performance, and labor<\/em> \u2014 all backed by SunPower itself, not a third-party warranty insurer. Most of the other quotes had a 10-year labor warranty and a separate 25-year product warranty from the panel manufacturer. Those are two different companies, and if there’s a dispute about whether a problem is a panel defect or an installation error, you can end up in the middle.<\/p>\n\n\n\n At $28,400 before incentives, Quote C wasn’t the cheapest. After the 30% federal residential clean energy credit \u2014 which you can read about in detail on the IRS’s official guidance page for the Residential Clean Energy Credit<\/a> \u2014 my actual out-of-pocket cost came to $19,880. At Austin Energy’s current blended residential rate, my payback period works out to about 6.8 years.<\/p>\n\n\n\n If you want the full story of what happened after I signed \u2014 permitting delays, installation day, the first utility bill \u2014 I covered all of it in my earlier post walking through the complete six-month install timeline<\/a>. The quote decision is just the beginning.<\/p>\n\n\n\n Nail down your equipment requirements first.<\/strong> Decide whether you want microinverters or a string inverter, which panel tier (premium vs. standard), and whether you’re bundling battery storage. If you go in without these set, every quote will reflect a different system and you can’t compare anything.<\/p>\n\n\n\n Require a written line-item breakdown.<\/strong> The quote should list panel model, inverter model, number of panels, racking system, permit fees, interconnection fees, monitoring setup, and warranty terms \u2014 separately. If a company won’t provide this before contract, that tells you something.<\/p>\n\n\n\n Ask directly: does your company employ the installation crew?<\/strong> One question. Subcontracted crews aren’t automatically a problem, but it changes the post-install support dynamic. You should know before you sign.<\/p>\n\n\n\n I assumed the most recognizable brand would be the most reliable post-install support. It’s an understandable assumption \u2014 you figure a big company has the infrastructure to handle problems. In practice, that’s not consistently true.<\/p>\n\n\n\n SEIA’s residential solar market research<\/a> shows that the top five national installers account for less than 30% of all US residential installations. The rest \u2014 more than 70% \u2014 are regional and local companies. Which means “regional” doesn’t signal small or unreliable. It often signals leaner overhead, more competitive pricing, and installers whose business depends entirely on local reputation.<\/p>\n\n\n\n Claire’s verdict, after I’d sent her my comparison spreadsheet: “Just pick the one you trust.” Not wrong, honestly. By the end of the process, the math and the gut pointed to the same answer \u2014 which is the best outcome you can hope for when you’re making a $20,000 decision.<\/p>\n","protected":false},"excerpt":{"rendered":" The first quote I received was $34,800. The last one was $23,400. Same roof. Same 9.6kW system size. Same Austin address. That $11,400 difference isn’t a pricing error. It’s not one dishonest company and five honest ones. It’s how the solar industry is structured \u2014 and if you don’t understand what’s driving that spread, you’re … Read more<\/a><\/p>\n","protected":false},"author":3,"featured_media":49175,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[190],"tags":[],"class_list":["post-49173","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-residential-solar-energy"],"_links":{"self":[{"href":"https:\/\/entellusapparel.com\/blog\/wp-json\/wp\/v2\/posts\/49173","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/entellusapparel.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/entellusapparel.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/entellusapparel.com\/blog\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/entellusapparel.com\/blog\/wp-json\/wp\/v2\/comments?post=49173"}],"version-history":[{"count":1,"href":"https:\/\/entellusapparel.com\/blog\/wp-json\/wp\/v2\/posts\/49173\/revisions"}],"predecessor-version":[{"id":49174,"href":"https:\/\/entellusapparel.com\/blog\/wp-json\/wp\/v2\/posts\/49173\/revisions\/49174"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/entellusapparel.com\/blog\/wp-json\/wp\/v2\/media\/49175"}],"wp:attachment":[{"href":"https:\/\/entellusapparel.com\/blog\/wp-json\/wp\/v2\/media?parent=49173"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/entellusapparel.com\/blog\/wp-json\/wp\/v2\/categories?post=49173"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/entellusapparel.com\/blog\/wp-json\/wp\/v2\/tags?post=49173"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
\n\n\n\nWhy Quote A Was Padded<\/h2>\n\n\n\n
\n\n\n\nWhy Quote D Was Incomplete<\/h2>\n\n\n\n
\n\n\n\nWhy I Chose Quote C<\/h2>\n\n\n\n
\n\n\n\nThree Things to Do Before You Request a Single Quote<\/h2>\n\n\n\n
\n\n\n\nThe One Thing I Got Wrong<\/h2>\n\n\n\n